Starlink, installed right.
Same week. Anywhere in OC.

Most standard residential installs take two to four hours from arrival to working Wi-Fi. Simple pitched-roof mounts with a short cable run can finish in under two hours. Tile roofs, attic runs, pole mounts, and complex two-story homes can push closer to four. Either way, we plan for a single-visit install and do not leave until the dish is aligned, the app shows clean obstructions, and your Wi-Fi is configured and tested.

No. You order the Starlink kit directly from Starlink so you own the hardware and the account. We install the kit you supply. We can help you decide which kit to buy — Standard, Mini, Flat High Performance, Business, Roam, or Maritime — based on the install location, but the order goes through your Starlink account.

Six mount types cover nearly every Orange County install: pitched roof, flat roof ballast, non-penetrating J-mount, chimney mount, pole mount, and eave or gable mount. On-site we walk the roof, run the obstruction scan, and recommend the mount that gives you the cleanest line of sight with the least roof impact.

Yes. Tile roofs are common in Orange County and we install on them every week. Our preferred method is a non-penetrating J-mount or ballast mount that rests above the tile without cracking it. Where a penetration is required, we use tile-specific flashing and seal every layer so the roof stays watertight. We carry replacement tiles for the most common OC profiles in case one cracks during the walk.

Yes. We install Starlink Roam and Mini on Class A, Class C, Airstream, and fifth-wheel RVs, and Maritime kits on marina slips, sport fishers, and sail yachts. Mounts can be permanent or quick-disconnect depending on how you want to use the dish. Marine installs use corrosion-resistant hardware and sealed cable pass-throughs.

Standard residential installs start at $499 flat-rate. That covers the on-site survey, obstruction scan, dish mount (pick one of six mount types), cable routing up to 75 ft, weather sealing, Wi-Fi configuration, and a 30-minute walkthrough. Add-ons like attic runs, pole installs, and complex roofs are quoted up front during the survey so there are no billing surprises.

Yes. We cover all 34 cities in Orange County from Seal Beach to San Clemente, and from the coast through the canyons. Same-week scheduling is standard. Travel charges do not apply within the county — one published flat rate regardless of which OC city you are in.

Every install includes a full Wi-Fi configuration: router placement, SSID and password setup, Starlink app pairing, firmware check, and a live speed test. We also walk you through the app so you know how to run obstruction scans, reboot the dish, and monitor uptime. For larger homes we can add a secondary mesh node as an add-on during the on-site quote.

Yes. Every install comes with a workmanship warranty covering the mount, penetrations, cable routing, and weather sealing. The Starlink hardware itself is warrantied directly by Starlink under your account, so if the dish or router ever has a hardware fault you deal with Starlink support for a replacement. We will help you diagnose and can come back to re-mount a replacement unit.

Yes. If your current install is in the wrong spot, has intermittent obstructions, or was installed by someone who is no longer available, we can relocate it. We run a fresh obstruction scan, pick a better mount location, remove the old hardware, patch and seal the previous penetration, and re-install cleanly. Relocations are priced during the on-site assessment.